Painting my car at home, DIY, is it possible?

I own 2 old suvs, the paint of both of them had seen better days.

So I decided to re-spray the Suzuki.

I used Roberlo paint, compressor and air gun. I sanded the car with #400 sand paper as it is not a show car but an SUV that we use to drive on/off road. As you may see in the pictures/videos, conditions are far from a dealer place or even from just a simple paint shop 🙂 , but, it was much cheaper and most important , it was made with my own hands.

Of course there was rust, so I cut the rusted parts and welded some fresh metal instead:

The fix:

As you can see from the gallery above, I had to disassemble some parts, it was a nice opportunity to paint them:

The final result:

2 short videos which summarize the process in 3 minutes or less 🙂